|
Botanithane Green 40 data sheet
Download Botanithane Green 40 data sheet
Botanithane green 40 is an environmentally friendly two component packaging system.
Typical Physical Properties for Botanithane green 40 :
Viscosity
Part A (Cps) 200
Part B (Cps) 30
Density
Part A (Sg) 1.21
Part B (Sg) 0.99
Mixed (Sg) 0.40
Mix Ratio (PBV) 1 to 1
Creme Time (Sec) 3 to 7
Tack Free Time (Sec) 30 to 50
Operational Temp. (°F) 95-110
Recommended equipment settings for Botanithane green 40 :
The Hose Temperature for the A-Side is 95-110°F. (Recommended: 105°)
The Hose Temperature for the B-Side is 95-110°F. (Recommended: 100°)
Pressure with an E-Z Flow standard Impingement Gun is 200 PSI.
Shelf Life and Storage of Botanithane green 40 :
The self life for Botanithane green 40 is six months in factory delivered unopened containers. Keep away from extreme heat, cold, and moisture. Maintain at a proper storage temperature of 40°F - 100°F.
Botanithane green 40 is available for purchase in 15 gallon pails, 55 gallon drums, and 270 gallon totes.
Please refer to the product’s Material Safety Data Sheet for shipping, safety, handling, and regulatory information.
MATERIAL SAFETY DATA SHEET for green 40 B
Download Botanithane Green 40 MSDS
Effective Date: 11/11/08
Emergency Telephone Numbers: Infotrac (800)535-5053
or E-Z Flow Foam Systems (858) 279-3569
1. Product Identification
Synonyms: No Data
Molecular Weight: Blend
Chemical Formula: Mixture
Chemical Family: Polyol
Product Name: Botanithane green 40 B
2. Composition/Information on Ingredients
Ingredient CAS No Percent Hazardous
--------------------------------------- ------------ ------- ---------
Proprietary Blend 100
3. Hazards Identification
Emergency Overview
No Data
-----------------------------------------------------------------------------------------------------------
Potential Health Effects
Primary routes of entry: Eye, Skin, Ingestion and Inhalation.
Eye contact: May cause irritation
Skin: May cause irritation
Ingestion: May result in gastric disturbances, diarrhea and weakness.
Inhalation: None anticipated, but vapor inhalation should be avoided
4. First Aid Measures
Splash (eyes): Flush immediately with copious quantities of running water for at least 15 minutes. Consult physician.
Splash (skin): Wash affected area with soap and water. If irritation develops, consult physician.
Ingestion: Dilute with water and immediately induce vomiting. Never give fluids or induce vomiting if victim is unconscious or having convulsions. Consult physician.
Inhalation: Remove to fresh air; aid in breathing and if necessary, consult physician
5. Fire Fighting Measures
Flash Point (Test Method): 1600C C.O.C. Auto ignition: N/A
Flammability Limits in Air (% by Vol): Lower-N/A Upper-N/A
Extinguishing Media: Use Water Fog, Foam CO2 or Dry Chemical Extinguishing Media
Unusual Fire and Explosion Hazards: None under normal conditions
Special Fire fighting Procedures: Fire fighters should be equipped with self-contained breathing apparatus and turnout gear.
Emergency Telephone Numbers: Infotrac (800)535-5053
or E-Z Flow Foam Systems (858) 279-3569.
6. Accidental Release Measures
Spill and Leak Procedures: Spills should be contained, absorb in absorbent sweeping cleaning compound. Flush with water.
7. Handling and Storage
No Data
8. Exposure Controls/Personal Protection
Respiratory Protection: None needed at normal temperatures. If vapors are generated, wear an organic vapor respirator as necessary.
Ventilation: Use local exhaust to maintain work area below PEL and TVL
Protective Clothing: Rubber gloves, coveralls, apron, boots as necessary to prevent skin contact.
Eye Protection: Safety Goggles recommended.
Other Protective Equipment: No Special requirements, avoid contact with skin as required by normal good hygiene practices.
Hygienic Practices: Remove and wash contaminated clothing before re-use. Wash hands with soap and water.
9. Physical and Chemical Properties
Boiling-Melting Point @760 MM Hg: N/A ph: 6-7
Specific Gravity or Bulk Density: N/A Vapor Pressure MM Hg @200C: N/A
Evaporation Rate (Butyl Acetate=1): N/A Solubility in Water: Slight
Appearance, Odor & Intensity: Liquid; clear; Slight
10. Stability and Reactivity
Stability: Stable
Hazardous Decomposition Products: CO, CO2, other organic compounds, trace of nitrogen oxides.
Incompatibility (chemicals to avoid): Oxidizing materials.
Hazardous Polymerization: Does not occur.
11. Toxicological Information
No Data
12. Ecological Information
Environmental Fate: No Data
Environmental Toxicity: No Data
13. Disposal Considerations
Waste Disposal Method: Incinerate or bury in a licensed facility. Do not discharge into waterway or sewer system without proper authority.
Hazardous Waste 40 CFR 261: No Hazardous Waste Number:
Container Disposal: Dispose of in licensed facility. Recommend crushing or other means to prevent unauthorized reuse.
14. Transport Information
No Data
15. Regulatory Information
No Data
16. Other Information
HMIS Hazardous Rating: Category HMIS
Acute Health 2
Flammability 1
Reactivity 0
This product is not hazardous according to the OSHA Hazard Communication Standard.
Disclaimer:
******************************************************************************
We believe that the information contained in this MSDS is current. Since the use of this information and the conditions of the use of the product are not within our control, it is the user’s obligation to determine the conditions of safe use of this product. The information herein is given in good faith, but no warranty, expressed or implied, is made.
|
